...
| 1. | Select Search/Match (scan) from Data Command Panel > Tools. Notice the Search/Match dialog box has four tabs (Figure 5): –Chemical Filter –Database Filter –Candidate List –Selected Candidates |
| |
2. | Select desired search parameters (see suggestions below; Figures 6, 7, 8). | ||
3. | Once the desired parameters are selected, click Rebuild to rebuild the database for your selections. After the database is rebuilt, click back onto Candidate List and click Match. |
...
A chemical filter can be set for any element in the periodic table (Figure 6).
–Green = element is mandatory
–Red = must be absent
–Blue = at least one of the elements in blue must be present in the search result
–Gray = not checked (absent or present) 
Figure 6. Chemical Filter Tab.
...
This document originated from Word document XRD_EVA_QSGV1.2_368X.doc (see Archived Versions below for a pdf copy) that was written by H. Barnes and K. Bronk; later edited by N. Lawler and A. Armstrong. Credits for subsequent changes to this document are given in the page history.
Archived Versions
LMUG-XRDDiffrac.EVAQuickStartGuide-230220-1935-180.pdf
View file