...
12. Don't worry about getting too close to an exact value of 1, the TIFF/JPEG correction will correct those values.
...
2. Turn Lights On by clicking Lights On. Remember if the Temperature goes above 39 °C 39°C you must turn the lights off and wait until the temperature drops before proceeding.
...
3. Adjust the Master Black gain until the GREEN value is around 15 (Figure 26, RED GREEN and BLUE boxes in the image grab window). Qualitatively, this is what's been found to produce a nice image. Please note that the RGB value of the black square is about 50, but this will be corrected for in the TIFF/JPEG correction. Remember to turn Turn off the lights if temp is getting above 39°C.
...
5. Adjust the Blue Black gain until the BLUE/GREEN value is near 1 (Blue is 50, Green is 50).
6. Keep an eye on the histogram graph on the bottom left corner (Figure 26). We want all the colors to overlay each other pretty closely. Adjusting the RedGain and BlueGain will move the colors (histograms) in the graph in the lower left, move until they are over lapping.
...