...

If the dismembrator does not start the program after pressing the button "Start", i.e., if the screen still displays 'P  0' (Power=0) and not 'rdy' (Ready), press the "Reset" button, then press "Test" and finally "Start". The dismembrator should clear the error and starts start the program normally. Power on the display screen should be 'P  11' when a sample is vibrating. The cause of this error is unknown and happens when the dismembrator is turn turned on.

References

Jackson, M.L., 1956. Soil Chemical- Analysis Advanced Course by Hsueh-Wen Yeh, Hawaii Institute of Geophysics, 1980.
Moore, D.M., and Reynolds, R.C., Jr., 1989. X-ray Diffraction and the Identification and Analysis of Clay Minerals: New York (Oxford University Press).

...