...
3. Place a small piece of Glad Wrap at the measurement location to keep the sensors caliper sensor clean and the core free of contamination (including water).
...
Figure 3.- Measurement Configuration Options
2. Depending on which measurement, insert the bayonets into or close the caliper onto the sample. Click the instrument motion buttons to slowly lower the transducers to the sample (Figure 4). The autoclose Alternatively, use auto close. Auto close button functions for either the caliper or the bayonets.
...
3. The program continually updates the velocity calculation and displays the value (Average of the sets of stacksstack set) in the Velocity-Auto box (Figure 5).
...
Note: If the velocity is out of the expected range, or the pick location is not near to or at the first arrival wave, contact the PP technician.
...
10. MUT is used to upload data to the LIMS database. See section "Uploading Data to LIMS" for more information on data upload.
11. Once uploaded, data is available to view on LORE and LIVE. If data is not instantly visible, please contact the PP technician.
...