...
All improvements to the Quick Start Guides and User Guides are a communal effort, with honorable mention to the group of LOs, ALOs, and technicians who have helped.
VII. LIMS Component Tables
The following LIMS component tables are included under the Section Half Imaging Logger (SHIL):
- LSIMG - linescan imaging of the section half
- WRLS - linescan imaging of the individual 90-degree quadrants for whole-round imaging of the outside of a hard rock section
- WRLSC - component for the collection of the final 90-degree quadrant images as well as the 360-degree composite image
| ANALYSIS | TABLE | NAME | ABOUT TEXT |
| LSIMG | SAMPLE | Exp | Exp: expedition number |
| LSIMG | SAMPLE | Site | Site: site number |
| LSIMG | SAMPLE | Hole | Hole: hole number |
| LSIMG | SAMPLE | Core | Core: core number |
| LSIMG | SAMPLE | Type | Type: type indicates the coring tool used to recover the core (typical types are F, H, R, X). |
| LSIMG | SAMPLE | Sect | Sect: section number |
| LSIMG | SAMPLE | A/W | A/W: archive (A) or working (W) section half. |
| LSIMG | SAMPLE | text_id | Text_ID: automatically generated database identifier for a sample, also carried on the printed labels. This identifier is guaranteed to be unique across all samples. |
| LSIMG | SAMPLE | sample_number | Sample Number: automatically generated database identifier for a sample. This is the primary key of the SAMPLE table. |
| LSIMG | SAMPLE | label_id | Label identifier: automatically generated, human readable name for a sample that is printed on labels. This name is not guaranteed unique across all samples. |
| LSIMG | SAMPLE | sample_name | Sample name: short name that may be specified for a sample. You can use an advanced filter to narrow your search by this parameter. |
| LSIMG | SAMPLE | x_sample_state | Sample state: Single-character identifier always set to "W" for samples; standards can vary. |
| LSIMG | SAMPLE | x_project | Project: similar in scope to the expedition number, the difference being that the project is the current cruise, whereas expedition could refer to material/results obtained on previous cruises |
| LSIMG | SAMPLE | x_capt_loc | Captured location: "captured location," this field is usually null and is unnecessary because any sample captured on the JR has a sample_number ending in 1, and GCR ending in 2 |
| LSIMG | SAMPLE | location | Location: location that sample was taken; this field is usually null and is unnecessary because any sample captured on the JR has a sample_number ending in 1, and GCR ending in 2 |
| LSIMG | SAMPLE | x_sampling_tool | Sampling tool: sampling tool used to take the sample (e.g., syringe, spatula) |
| LSIMG | SAMPLE | changed_by | Changed by: username of account used to make a change to a sample record |
| LSIMG | SAMPLE | changed_on | Changed on: date/time stamp for change made to a sample record |
| LSIMG | SAMPLE | sample_type | Sample type: type of sample from a predefined list (e.g., HOLE, CORE, LIQ) |
| LSIMG | SAMPLE | x_offset | Offset (m): top offset of sample from top of parent sample, expressed in meters. |
| LSIMG | SAMPLE | x_offset_cm | Offset (cm): top offset of sample from top of parent sample, expressed in centimeters. This is a calculated field (offset, converted to cm) |
| LSIMG | SAMPLE | x_bottom_offset_cm | Bottom offset (cm): bottom offset of sample from top of parent sample, expressed in centimeters. This is a calculated field (offset + length, converted to cm) |
| LSIMG | SAMPLE | x_diameter | Diameter (cm): diameter of sample, usually applied only to CORE, SECT, SHLF, and WRND samples; however this field is null on both Exp. 390 and 393, so it is no longer populated by Sample Master |
| LSIMG | SAMPLE | x_orig_len | Original length (m): field for the original length of a sample; not always (or reliably) populated |
| LSIMG | SAMPLE | x_length | Length (m): field for the length of a sample [as entered upon creation] |
| LSIMG | SAMPLE | x_length_cm | Length (cm): field for the length of a sample. This is a calculated field (length, converted to cm). |
| LSIMG | SAMPLE | status | Status: single-character code for the current status of a sample (e.g., active, canceled) |
| LSIMG | SAMPLE | old_status | Old status: single-character code for the previous status of a sample; used by the LIME program to restore a canceled sample |
| LSIMG | SAMPLE | original_sample | Original sample: field tying a sample below the CORE level to its parent HOLE sample |
| LSIMG | SAMPLE | parent_sample | Parent sample: the sample from which this sample was taken (e.g., for PWDR samples, this might be a SHLF or possibly another PWDR) |
| LSIMG | SAMPLE | standard | Standard: T/F field to differentiate between samples (standard=F) and QAQC standards (standard=T) |
| LSIMG | SAMPLE | login_by | Login by: username of account used to create the sample (can be the LIMS itself [e.g., SHLFs created when a SECT is created]) |
| LSIMG | SAMPLE | login_date | Login date: creation date of the sample |
| LSIMG | SAMPLE | legacy | Legacy flag: T/F indicator for when a sample is from a previous expedition and is locked/uneditable on this expedition |
| LSIMG | TEST | test changed_on | TEST changed on: date/time stamp for a change to a test record. |
| LSIMG | TEST | test status | TEST status: single-character code for the current status of a test (e.g., active, in process, canceled) |
| LSIMG | TEST | test old_status | TEST old status: single-character code for the previous status of a test; used by the LIME program to restore a canceled test |
| LSIMG | TEST | test test_number | TEST test number: automatically generated database identifier for a test record. This is the primary key of the TEST table. |
| LSIMG | TEST | test date_received | TEST date received: date/time stamp for the creation of the test record. |
| LSIMG | TEST | test instrument | TEST instrument [instrument group]: field that describes the instrument group (most often this applies to loggers with multiple sensors); often obscure (e.g., user_input) |
| LSIMG | TEST | test analysis | TEST analysis: analysis code associated with this test (foreign key to the ANALYSIS table) |
| LSIMG | TEST | test x_project | TEST project: similar in scope to the expedition number, the difference being that the project is the current cruise, whereas expedition could refer to material/results obtained on previous cruises |
| LSIMG | TEST | test sample_number | TEST sample number: the sample_number of the sample to which this test record is attached; a foreign key to the SAMPLE table |
| LSIMG | TEST | test x_display | TEST display flag: T/F field to indicate whether an image is the display image |
| LSIMG | TEST | test legacy | TEST legacy: T/F indicator for when a test from a previous expedition and is locked/uneditable on this expedition |
| LSIMG | CALCULATED | Top depth CSF-A (m) | Top depth CSF-A (m): position of observation expressed relative to the top of the hole. |
| LSIMG | CALCULATED | Bottom depth CSF-A (m) | Bottom depth CSF-A (m): position of observation expressed relative to the top of the hole. |
| LSIMG | CALCULATED | Top depth CSF-B (m) | Top depth [other] (m): position of observation expressed relative to the top of the hole. The location is presented in a scale selected by the science party or the report user. |
| LSIMG | CALCULATED | Bottom depth CSF-B (m) | Bottom depth [other] (m): position of observation expressed relative to the top of the hole. The location is presented in a scale selected by the science party or the report user. |
| LSIMG | RESULT | config_asman_id | RESULT configuration file ASMAN_ID: serial number of the ASMAN link for the configuration file |
| LSIMG | RESULT | config_filename | RESULT configuration filename: file name of the configuration file |
| LSIMG | RESULT | consumer_image_asman_id | RESULT consumer image ASMAN_ID: serial number of the ASMAN link for the uncropped JPG image file |
| LSIMG | RESULT | consumer_image_filename | RESULT consumer image filename: file name of the uncropped JPG image file |
| LSIMG | RESULT | correction | RESULT correction: summary of corrections applied to the TIF file and JPG file (contrast, gamma, and brightness only) |
| LSIMG | RESULT | cropped_image_asman_id | RESULT cropped image ASMAN_ID: serial number of the ASMAN link for the cropped JPG image file |
| LSIMG | RESULT | cropped_image_filename | RESULT cropped image filename: file name of the cropped JPG image file |
| LSIMG | RESULT | cropped_image_length | RESULT cropped image length (cm): length of the cropped image as calculated from the total lines x 50 micron pixels |
| LSIMG | RESULT | image_description | RESULT image description: archaic field for "Pristine" or other choices |
| LSIMG | RESULT | image_purpose | RESULT image purpose: field for what the target is (e.g., soft sediment, dry hard rock) |
| LSIMG | RESULT | instrument | RESULT instrument: which sensor is used for this result; for LSIMG it is currently JAI SW-2001T-CL-F camera |
| LSIMG | RESULT | observed_length | RESULT observed length (cm): length of the core section as entered by the operator |
| LSIMG | RESULT | original_image_asman_id | RESULT original image ASMAN_ID: serial number of the ASMAn link for the uncropped TIF file (also not adjusted for contrast, gamma, or brightness) |
| LSIMG | RESULT | original_image_filename | RESULT original image filename: file name of the uncropped TIF file |
| LSIMG | RESULT | roi_left_edge | RESULT region of interest left edge (pixels): position of the left edge of the cropped image in pixels |
| LSIMG | RESULT | roi_lower_edge | RESULT region of interest lower edge (pixels): position of the lower edge of the cropped image in pixels |
| LSIMG | RESULT | roi_right_edge | RESULT region of interest right edge (pixels): position of the right edge of the cropped image in pixels |
| LSIMG | RESULT | roi_upper_edge | RESULT region of interest upper edge (pixels): position of the upper edge of the cropped image in pixels |
| LSIMG | RESULT | run_asman_id | RESULT run file ASMAN_ID: serial number of the ASMAN link for the run (.ROI) file |
| LSIMG | RESULT | run_filename | RESULT run filename: file name for the run (.ROI) file |
| LSIMG | SAMPLE | sample description | SAMPLE comment: contents of the SAMPLE.description field, usually shown on reports as "Sample comments" |
| LSIMG | TEST | test test_comment | TEST comment: contents of the TEST.comment field, usually shown on reports as "Test comments" |
| LSIMG | RESULT | result comments | RESULT comment: contents of a result parameter with name = "comment," usually shown on reports as "Result comments" |
| ANALYSIS | TABLE | NAME | ABOUT TEXT |
| WRLS | SAMPLE | Exp | Exp: expedition number |
| WRLS | SAMPLE | Site | Site: site number |
| WRLS | SAMPLE | Hole | Hole: hole number |
| WRLS | SAMPLE | Core | Core: core number |
| WRLS | SAMPLE | Type | Type: type indicates the coring tool used to recover the core (typical types are F, H, R, X). |
| WRLS | SAMPLE | Sect | Sect: section number |
| WRLS | SAMPLE | text_id | Text_ID: automatically generated database identifier for a sample, also carried on the printed labels. This identifier is guaranteed to be unique across all samples. |
| WRLS | SAMPLE | sample_number | Sample Number: automatically generated database identifier for a sample. This is the primary key of the SAMPLE table. |
| WRLS | SAMPLE | label_id | Label identifier: automatically generated, human readable name for a sample that is printed on labels. This name is not guaranteed unique across all samples. |
| WRLS | SAMPLE | sample_name | Sample name: short name that may be specified for a sample. You can use an advanced filter to narrow your search by this parameter. |
| WRLS | SAMPLE | x_sample_state | Sample state: Single-character identifier always set to "W" for samples; standards can vary. |
| WRLS | SAMPLE | x_project | Project: similar in scope to the expedition number, the difference being that the project is the current cruise, whereas expedition could refer to material/results obtained on previous cruises |
| WRLS | SAMPLE | x_capt_loc | Captured location: "captured location," this field is usually null and is unnecessary because any sample captured on the JR has a sample_number ending in 1, and GCR ending in 2 |
| WRLS | SAMPLE | location | Location: location that sample was taken; this field is usually null and is unnecessary because any sample captured on the JR has a sample_number ending in 1, and GCR ending in 2 |
| WRLS | SAMPLE | x_sampling_tool | Sampling tool: sampling tool used to take the sample (e.g., syringe, spatula) |
| WRLS | SAMPLE | changed_by | Changed by: username of account used to make a change to a sample record |
| WRLS | SAMPLE | changed_on | Changed on: date/time stamp for change made to a sample record |
| WRLS | SAMPLE | sample_type | Sample type: type of sample from a predefined list (e.g., HOLE, CORE, LIQ) |
| WRLS | SAMPLE | x_offset | Offset (m): top offset of sample from top of parent sample, expressed in meters. |
| WRLS | SAMPLE | x_offset_cm | Offset (cm): top offset of sample from top of parent sample, expressed in centimeters. This is a calculated field (offset, converted to cm) |
| WRLS | SAMPLE | x_bottom_offset_cm | Bottom offset (cm): bottom offset of sample from top of parent sample, expressed in centimeters. This is a calculated field (offset + length, converted to cm) |
| WRLS | SAMPLE | x_diameter | Diameter (cm): diameter of sample, usually applied only to CORE, SECT, SHLF, and WRND samples; however this field is null on both Exp. 390 and 393, so it is no longer populated by Sample Master |
| WRLS | SAMPLE | x_orig_len | Original length (m): field for the original length of a sample; not always (or reliably) populated |
| WRLS | SAMPLE | x_length | Length (m): field for the length of a sample [as entered upon creation] |
| WRLS | SAMPLE | x_length_cm | Length (cm): field for the length of a sample. This is a calculated field (length, converted to cm). |
| WRLS | SAMPLE | status | Status: single-character code for the current status of a sample (e.g., active, canceled) |
| WRLS | SAMPLE | old_status | Old status: single-character code for the previous status of a sample; used by the LIME program to restore a canceled sample |
| WRLS | SAMPLE | original_sample | Original sample: field tying a sample below the CORE level to its parent HOLE sample |
| WRLS | SAMPLE | parent_sample | Parent sample: the sample from which this sample was taken (e.g., for PWDR samples, this might be a SHLF or possibly another PWDR) |
| WRLS | SAMPLE | standard | Standard: T/F field to differentiate between samples (standard=F) and QAQC standards (standard=T) |
| WRLS | SAMPLE | login_by | Login by: username of account used to create the sample (can be the LIMS itself [e.g., SHLFs created when a SECT is created]) |
| WRLS | SAMPLE | login_date | Login date: creation date of the sample |
| WRLS | SAMPLE | legacy | Legacy flag: T/F indicator for when a sample is from a previous expedition and is locked/uneditable on this expedition |
| WRLS | TEST | test changed_on | TEST changed on: date/time stamp for a change to a test record. |
| WRLS | TEST | test status | TEST status: single-character code for the current status of a test (e.g., active, in process, canceled) |
| WRLS | TEST | test old_status | TEST old status: single-character code for the previous status of a test; used by the LIME program to restore a canceled test |
| WRLS | TEST | test test_number | TEST test number: automatically generated database identifier for a test record. This is the primary key of the TEST table. |
| WRLS | TEST | test date_received | TEST date received: date/time stamp for the creation of the test record. |
| WRLS | TEST | test instrument | TEST instrument [instrument group]: field that describes the instrument group (most often this applies to loggers with multiple sensors); often obscure (e.g., user_input) |
| WRLS | TEST | test analysis | TEST analysis: analysis code associated with this test (foreign key to the ANALYSIS table) |
| WRLS | TEST | test x_project | TEST project: similar in scope to the expedition number, the difference being that the project is the current cruise, whereas expedition could refer to material/results obtained on previous cruises |
| WRLS | TEST | test sample_number | TEST sample number: the sample_number of the sample to which this test record is attached; a foreign key to the SAMPLE table |
| WRLS | TEST | test x_display | TEST display flag: T/F field to indicate whether an image is the display image |
| WRLS | TEST | test legacy | TEST legacy: T/F indicator for when a test from a previous expedition and is locked/uneditable on this expedition |
| WRLS | CALCULATED | Top depth CSF-A (m) | Top depth CSF-A (m): position of observation expressed relative to the top of the hole. |
| WRLS | CALCULATED | Bottom depth CSF-A (m) | Bottom depth CSF-A (m): position of observation expressed relative to the top of the hole. |
| WRLS | CALCULATED | Top depth CSF-B (m) | Top depth [other] (m): position of observation expressed relative to the top of the hole. The location is presented in a scale selected by the science party or the report user. |
| WRLS | CALCULATED | Bottom depth CSF-B (m) | Bottom depth [other] (m): position of observation expressed relative to the top of the hole. The location is presented in a scale selected by the science party or the report user. |
| WRLS | RESULT | quadrant | RESULT quadrant: which 90-degree quadrant was captured in this image |
| WRLS | RESULT | quadrant_tif_asman_id | RESULT quadrant TIF ASMAN_ID: serial number of the ASMAN link for the quadrant TIF/TIFF image |
| WRLS | RESULT | quadrant_tif_filename | RESULT quadrant TIF filename: file name of the quadrant TIF/TIFF image |
| WRLS | RESULT | quadrant_jpg_asman_id | RESULT quadrant JPG ASMAN_ID: serial number of the ASMAN link for the quadrant JPG/JPEG image |
| WRLS | RESULT | quadrant_jpg_filename | RESULT quadrant JPG filename: file name of the quadrant JPG/JPEG image |
| WRLS | RESULT | run_asman_id | RESULT run file ASMAN_ID: serial number of the ASMAN link for the run (.WRLS) file |
| WRLS | RESULT | run_filename | RESULT run filename: file name of the run (.WRLS) file |
| WRLS | SAMPLE | sample description | SAMPLE comment: contents of the SAMPLE.description field, usually shown on reports as "Sample comments" |
| WRLS | TEST | test test_comment | TEST comment: contents of the TEST.comment field, usually shown on reports as "Test comments" |
| WRLS | RESULT | result comments | RESULT comment: contents of a result parameter with name = "comment," usually shown on reports as "Result comments" |
| ANALYSIS | TABLE | NAME | ABOUT TEXT |
| WRLSC | SAMPLE | Exp | Exp: expedition number |
| WRLSC | SAMPLE | Site | Site: site number |
| WRLSC | SAMPLE | Hole | Hole: hole number |
| WRLSC | SAMPLE | Core | Core: core number |
| WRLSC | SAMPLE | Type | Type: type indicates the coring tool used to recover the core (typical types are F, H, R, X). |
| WRLSC | SAMPLE | Sect | Sect: section number |
| WRLSC | SAMPLE | text_id | Text_ID: automatically generated database identifier for a sample, also carried on the printed labels. This identifier is guaranteed to be unique across all samples. |
| WRLSC | SAMPLE | sample_number | Sample Number: automatically generated database identifier for a sample. This is the primary key of the SAMPLE table. |
| WRLSC | SAMPLE | label_id | Label identifier: automatically generated, human readable name for a sample that is printed on labels. This name is not guaranteed unique across all samples. |
| WRLSC | SAMPLE | sample_name | Sample name: short name that may be specified for a sample. You can use an advanced filter to narrow your search by this parameter. |
| WRLSC | SAMPLE | x_sample_state | Sample state: Single-character identifier always set to "W" for samples; standards can vary. |
| WRLSC | SAMPLE | x_project | Project: similar in scope to the expedition number, the difference being that the project is the current cruise, whereas expedition could refer to material/results obtained on previous cruises |
| WRLSC | SAMPLE | x_capt_loc | Captured location: "captured location," this field is usually null and is unnecessary because any sample captured on the JR has a sample_number ending in 1, and GCR ending in 2 |
| WRLSC | SAMPLE | location | Location: location that sample was taken; this field is usually null and is unnecessary because any sample captured on the JR has a sample_number ending in 1, and GCR ending in 2 |
| WRLSC | SAMPLE | x_sampling_tool | Sampling tool: sampling tool used to take the sample (e.g., syringe, spatula) |
| WRLSC | SAMPLE | changed_by | Changed by: username of account used to make a change to a sample record |
| WRLSC | SAMPLE | changed_on | Changed on: date/time stamp for change made to a sample record |
| WRLSC | SAMPLE | sample_type | Sample type: type of sample from a predefined list (e.g., HOLE, CORE, LIQ) |
| WRLSC | SAMPLE | x_offset | Offset (m): top offset of sample from top of parent sample, expressed in meters. |
| WRLSC | SAMPLE | x_offset_cm | Offset (cm): top offset of sample from top of parent sample, expressed in centimeters. This is a calculated field (offset, converted to cm) |
| WRLSC | SAMPLE | x_bottom_offset_cm | Bottom offset (cm): bottom offset of sample from top of parent sample, expressed in centimeters. This is a calculated field (offset + length, converted to cm) |
| WRLSC | SAMPLE | x_diameter | Diameter (cm): diameter of sample, usually applied only to CORE, SECT, SHLF, and WRND samples; however this field is null on both Exp. 390 and 393, so it is no longer populated by Sample Master |
| WRLSC | SAMPLE | x_orig_len | Original length (m): field for the original length of a sample; not always (or reliably) populated |
| WRLSC | SAMPLE | x_length | Length (m): field for the length of a sample [as entered upon creation] |
| WRLSC | SAMPLE | x_length_cm | Length (cm): field for the length of a sample. This is a calculated field (length, converted to cm). |
| WRLSC | SAMPLE | status | Status: single-character code for the current status of a sample (e.g., active, canceled) |
| WRLSC | SAMPLE | old_status | Old status: single-character code for the previous status of a sample; used by the LIME program to restore a canceled sample |
| WRLSC | SAMPLE | original_sample | Original sample: field tying a sample below the CORE level to its parent HOLE sample |
| WRLSC | SAMPLE | parent_sample | Parent sample: the sample from which this sample was taken (e.g., for PWDR samples, this might be a SHLF or possibly another PWDR) |
| WRLSC | SAMPLE | standard | Standard: T/F field to differentiate between samples (standard=F) and QAQC standards (standard=T) |
| WRLSC | SAMPLE | login_by | Login by: username of account used to create the sample (can be the LIMS itself [e.g., SHLFs created when a SECT is created]) |
| WRLSC | SAMPLE | login_date | Login date: creation date of the sample |
| WRLSC | SAMPLE | legacy | Legacy flag: T/F indicator for when a sample is from a previous expedition and is locked/uneditable on this expedition |
| WRLSC | TEST | test changed_on | TEST changed on: date/time stamp for a change to a test record. |
| WRLSC | TEST | test status | TEST status: single-character code for the current status of a test (e.g., active, in process, canceled) |
| WRLSC | TEST | test old_status | TEST old status: single-character code for the previous status of a test; used by the LIME program to restore a canceled test |
| WRLSC | TEST | test test_number | TEST test number: automatically generated database identifier for a test record. This is the primary key of the TEST table. |
| WRLSC | TEST | test date_received | TEST date received: date/time stamp for the creation of the test record. |
| WRLSC | TEST | test instrument | TEST instrument [instrument group]: field that describes the instrument group (most often this applies to loggers with multiple sensors); often obscure (e.g., user_input) |
| WRLSC | TEST | test analysis | TEST analysis: analysis code associated with this test (foreign key to the ANALYSIS table) |
| WRLSC | TEST | test x_project | TEST project: similar in scope to the expedition number, the difference being that the project is the current cruise, whereas expedition could refer to material/results obtained on previous cruises |
| WRLSC | TEST | test sample_number | TEST sample number: the sample_number of the sample to which this test record is attached; a foreign key to the SAMPLE table |
| WRLSC | TEST | test x_display | TEST display flag: T/F field to indicate whether an image is the display image |
| WRLSC | TEST | test legacy | TEST legacy: T/F indicator for when a test from a previous expedition and is locked/uneditable on this expedition |
| WRLSC | CALCULATED | Top depth CSF-A (m) | Top depth CSF-A (m): position of observation expressed relative to the top of the hole. |
| WRLSC | CALCULATED | Bottom depth CSF-A (m) | Bottom depth CSF-A (m): position of observation expressed relative to the top of the hole. |
| WRLSC | CALCULATED | Top depth CSF-B (m) | Top depth [other] (m): position of observation expressed relative to the top of the hole. The location is presented in a scale selected by the science party or the report user. |
| WRLSC | CALCULATED | Bottom depth CSF-B (m) | Bottom depth [other] (m): position of observation expressed relative to the top of the hole. The location is presented in a scale selected by the science party or the report user. |
| WRLSC | RESULT | jpg0_asman_id | RESULT 0 degree JPG ASMAN_ID: serial number of the ASMAN link for the 0-degree quadrant JPG/JPEG image |
| WRLSC | RESULT | jpg90_asman_id | RESULT 90 degree JPG ASMAN_ID: serial number of the ASMAN link for the 90-degree quadrant JPG/JPEG image |
| WRLSC | RESULT | jpg180_asman_id | RESULT 180 degree JPG ASMAN_ID: serial number of the ASMAN link for the 180-degree quadrant JPG/JPEG image |
| WRLSC | RESULT | jpg270_asman_id | RESULT 270 degree JPG ASMAN_ID: serial number of the ASMAN link for the 270-degree quadrant JPG/JPEG image |
| WRLSC | RESULT | jpg360_asman_id | RESULT 360 degree image JPG ASMAN_ID: serial number of the composite 360-degree image JPG/JPEG image |
| WRLSC | RESULT | jpg360_filename | RESULT 360 degree JPG filename: file name of the composite 360-degree JPG/JPEG image (a filename exists for each quadrant, but name is similar enough it was omitted from expanded report) |
| WRLSC | RESULT | tif0_asman_id | RESULT 0 degree TIF ASMAN_ID: serial number of the ASMAN link for the 0-degree quadrant TIF/TIFF image |
| WRLSC | RESULT | tif90_asman_id | RESULT 90 degree TIF ASMAN_ID: serial number of the ASMAN link for the 90-degree quadrant TIF/TIFF image |
| WRLSC | RESULT | tif180_asman_id | RESULT 180 degree TIF ASMAN_ID: serial number of the ASMAN link for the 180-degree quadrant TIF/TIFF image |
| WRLSC | RESULT | tif270_asman_id | RESULT 270 degree TIF ASMAN_ID: serial number of the ASMAN link for the 270-degree quadrant TIF/TIFF image |
| WRLSC | RESULT | tif360_asman_id | RESULT 360 degree image TIF ASMAN_ID: serial number of the composite 360-degree image TIF/TIFF image |
| WRLSC | RESULT | tif360_filename | RESULT 360 degree TIF filename: file name of the composite 360-degree JPG/JPEG image (a filename exists for each quadrant, but name is similar enough it was omitted from expanded report) |
| WRLSC | RESULT | timestamp | RESULT timestamp: time/date stamp when the composite was made by the Imaging Specialist (not always filled in) |
| WRLSC | SAMPLE | sample description | SAMPLE comment: contents of the SAMPLE.description field, usually shown on reports as "Sample comments" |
| WRLSC | TEST | test test_comment | TEST comment: contents of the TEST.comment field, usually shown on reports as "Test comments" |
| WRLSC | RESULT | result comments | RESULT comment: contents of a result parameter with name = "comment," usually shown on reports as "Result comments" |
VIII. Archived Versions
LMUG-SHILUserGuide-020320-1516-374.pdf
...