Petrographic Image Capture and Archiving Tool (PICAT):User Guide
Author: | W. Crawford, C. Bennight |
Reviewer(s): | J. Beck |
Management Approval (Name, Title, Date): | D.J. Houpt |
Audience: | Scientists |
Origination date: | 08/24/10 |
Current version: | DRAFT (1) 09/06/10 |
Revised: | V1.1 | 1/6/2014 (IODP-II) |
Domain: | Imaging |
System: |
|
Keywords: |
|
Introduction
This system was designed to digitally photograph Petrographic Thin Section samples, capturing the entire slide in an efficient manner in both cross-polarized and single (plane)-polarized states. Microscopes are commonly used for imaging thin sections, but they do not have a field of view wide enough to image the entire specimen. A whole specimen view is needed to provide a map (or guide) showing the relationship of the entire sample to specifically captured higher-detailed regions. The most common method of obtaining a full specimen image has been with the use of a modified flat bed or film scanner. Whereas these methods have been successful in some instances, they are cumbersome, slow, and tedious when the entire workflow process is considered.
The PICAT (Petrographic Image Capture and Archival Tool) provides an easy and versatile imaging process that captures a publication-quality image (8 x 10 inches at 300 DPI) within seconds rather than minutes. When coupled with a workflow-optimized software package, the time, effort, and training needed to capture thin section image data is significantly reduced. The live image displayed on a computer monitor instantly shows errors in exposure, focus, color balance, and cropping. The operator is confident the image is correct before rendering the sample to digital state.
...
The software is the only application that logs data to the TSIMAGE analysis. TSIMAGE analysis is defined as follows:
Name | Order | Alias | Reportable | Optional | Description |
camera | 1 | Camera | T | T | Camera used to take the image |
iso | 2 | ISO Speed | T | T | ISO Speed (sensitivity) of camera |
aperture | 3 | Aperture | T | T | Aperture of camera (f-stop) |
shutter_speed | 4 | Shutter Speed | T | T | Shutter Speed |
focal_length | 5 | Focal Length | T | T | Focal length of lens |
date_taken | 6 | Date Taken | T | T | Date the photo was taken (from EXIF) |
macro | 7 | Macro Setting | T | T | Reduction in field of view due to macro lens setting |
polarization | 8 | Polarization | T | T | Polarization setting (none, cross, single) |
polarizationangle | 9 | Polarization Angle (cross-pol) | T | T | Polarization Angle (for cross-pol only) |
jpeg_filename | 10 | Jpeg Filename | F | T | Filename of closeup image |
jpeg_asman_id | 11 | Thin Section Image | T | T | Asman id of thin section image |
raw_asman_id | 12 | Raw Image | T | T | Camera RAW image file |
raw_filename | 13 | Raw Image Filename | F | T | Raw image original filename |
comments | 14 | Comments | T | T | Comments |
When deploying, the only setting that needs to be changed is the publish location and default server.
...
1. Start the IODP Image Capture software and login using LIMS username and password. Under the Settings menu, select the Thin Section Mode. Here you can also select the folders Image Capture will look for the images taken.
2. After software log-in, a list displayed the upper left corner shows the images that were just taken (the JPG files specifically). Click on one of the images to select it for processing.
...