...
The microscope has a Zeiss 506 color camera attached and has Zen lite software installed. The sensitivity of the camera is based on a 6 megapixel CCD sensor and has a resolution of 2752 horizontal pixels × 2208 vertical pixels.
(Graph light source spectrum, camera efficiency spectrum, source: coolled.com, zeiss.com)
Zen blue (image acquisition software)
Before starting the software, plug in the blue and black cable in the back of the camera. The small LED on top of the camera should be blue.
1) Find either the desktop or toolbar Zen button after the camera is plugged in and click it to open.
...
4) In the Left Tool area the user can set all microscope components to the current microscope settings (objective etc.) in order for the metadata to be saved once ready for image acquisition.
Comment: any suggestions for "correct settings"? Like what objective for which purpose? I think you mean "desired settings"?
5) In the same tool area to the left, the camera settings can be adjusted (exposure time, white balance etc.).
Comment: Suggestions? For instance, an exposure time of XX s would be preferable for blabla.
Screenshot of the camera settings, like you did above for the Microscope components?
I see on the screenshot "Movie Recorder". Is it possible to take a video while moving the sample? If so, maybe you can write something about it if this is a nice/interesting/useful feature of the microscope?
6) When ready, click Snap. The software will take a picture and display it as .czi file in the central screen area.
...
7) In the Processing tool, pick the Method Image Export and select JPEG or TIFF (Compression: None) filetype, Export to C:\data\in and Generate xml file, then click Apply. When the user closes the program, the user will be asked if the original .czi file should be saved as well - please confirm and save in the same folder.
Comment: What is the difference between Single and Batch? (I get it, but it would be nice to have some info, if feasible, on how to export a batch of images)
Is there any other image filetype available? Why jpeg? Why not the other filetypes? If this is an uploader thing, maybe you can write it down - so that the user does not save all images in another format and then the future upload does not work....
Question because I do not know: is. czi an image type? Could .czi be open by Illustrator so the scientists can play with the image/data? And then back to the issue: but they do not have Illustrator 
8) IODP is developing an uploader tool for these images. Until then, save the images on Uservol/Microbiology/Microscope_images.
9) Once the session is concluded, switch off all lights, unplug the camera, cover the lower light source with the light cover, cover the eyepieces with the rubber cover and at last add the big, blue dust cover over the microscope and it's lights.
Movie recording feature:
It is possible to record a MOVIE (Continuous) of moving around on the slide. There is no automatic stepper installed on this microscope. The user has to move X- and Y-Axis by hand when the movie is recorded. It will cause the movie to be fuzzy during the movement, but might pose a good solution to capture a high level overview.
...
7) In the Processing tool, pick the Method Movie Export and select MOV (MPEG4) filetype, Export to C:\data\in, then click Apply. When the user closes the program, the user will be asked if the original .czi file should be saved as well - please confirm and save in the same folder.
Follow step 8) and 9) as described above.
Archived Versions
LMUG-EpifluorescenceMicroscope-270922-1315-96.pdf 27Sept2022