Versions Compared

Old Version 4

changes.mady.by.user Unknown User (crowder)

Saved on

compared with

New Version Current

changes.mady.by.user Unknown User (stockmaster)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Check if Zebra Label printers for Core Entry and Sample Table have enough ribbon/labels; restock the 'Tapes' drawer at the Core Entry bench with labels and ribbons
  2. Test label printers. Adjust print on label to be completely on the sticker part, good practice is to print out one full set of section labels
  3. Check stock of D-tube tape/resupply if necessary
  4. Check stock level of blue, clear, and yellow endcaps under the aft whole-round track
  5. Check stock level of neoprene gloves (green) and rags in the cabinet under the core entry bench
    Anchor
    _GoBack
    _GoBack
    , restock if necessary
  6. Test the laser engraver
  7. If there is MBIO sampling make sure all tools are prepared in advance (ask curator/ALO)

Archive Versions