...
- Make sure the core boat is at home position outside of the NGR.
- Start the iSEG High-Voltage Control software using the desktop icon (Fig. 9a and 9b) or select Start > All Programs > iSEGHVwithCan > iSEGCANHVControl to open the iSEG MainMain window. This program controls the high-voltage power supply for the plastic scintillator MPTs through the iSEG power supply.
Figure 9a. iSEG Hard ware Setup and Main screen
Figure 9b. The controller cards may be the EHS or EHQ model and are labeled accordingly.
- Exit the iSEG program. When the program asks if you wish to ramp the power down on all channels, select Yes (Fig. 10).
...