...
Author(s): | D. Houpt (362T), X375 (T. Cobb), X376(S.Frazier) |
Reviewer(s): | M. Hastedt |
Management Approval (Name, Title, Date): |
|
Audience: | Users of the MAD analysis |
First Release: | 1 March 2009 |
Current Version: | X376 |
Revised: | X376 |
Domain: | Physics |
System: | Moisture and Density |
Contents
| Table of Contents | ||
|---|---|---|
|
Introduction
Method Overview
...
The result should be in the appropriate field, but in case the user double-clicked the wrong volume measurement, MADMax provides the capability to switch the volume measurement from "wet" to "dry" and vice-versa. As shown in Figure 27, right-click the mass cell and select the "Send this result to the Volume Wet (cm3)" option. If two volumes are already present, this option will instead state "Swap Volume Wet (cm3) to Volume Dry (cm3)."
Figure 27. Right-click options for the volume measurement.
Once the user clicks the "Swap" options, a window will pop up to confirm the action, similar to that for the swap mass measurements window.
Cancel Volume Result
The user can also cancel a result using the same right-click option, with a confirmation window similar to the one for canceling mass measurements mentioned earlier. A developer or technician can uncancel the result if this was done in error.
...