...
- Place 2 (if space allowed) 1L Nalgene bottles in the HF hood. Each bottle filled with Acid Eater up to half full. Scientist(s) pour HF/HCl waste solution directly into these bottles. Acid Eater should change color to indicate the neutralization of -F
- When the above bottle is 3/4 full, entire bottle is transferred into a 9L plastic carboy
- When the 9L carboy is half filled about half full, we moved them into another hood.
- Calcite sand was added slowly into the 9L waste carboy. Caution: this action cause causes foaming, add calcite little at a time and very slowly to allow the foaming reaction to subside.
- Test pH of the waste solution frequently, treat the solution as if F-F ions still exist.
- When pH is above 5, take a small aliquot out. Add a few drop of concentrated HCl to reduce the pH back to 1. Test the aliquot with HF test paper. If paper doesn't change color, the waste solution now can be treated as -F neutralized. (We have found that the Acid Eater does neutralize free F, we just cannot proof prove it with high concertation of HCl, as HF test paper turn turned yellow)
- Solution can be pour down the chemical sink, and the calcite sand can be disposed off overboard to prevent clogging the drain line.
- Carboy should then be rinsed and re-used for the next waste batch.