...
The Bruker Tracer5 pXRF makes contact elemental measurements on section halves and prepared powder mounts. The device emits a primary X-Ray beam that bombards the material and excites electrons. The movement of electrons emits secondary fluorescent radiation that is measured by a detector in the device. These energy patterns are characteristic to elements and determine what is present.
The Tracer5 pXRF can be run either independently or through an attached pc laptop. The Bruker RemoteCtrl software mirrors what is present on the screen of the Tracer5 and all functions are the same.
Before you begin: The instrument generates X-rays and should be only operated by authorized users trained in radiation safety. Do not expose any part of your body to X-rays!
Getting Started
Place a fully charged battery into the Tracer5 by opening the bottom of the handle. Alternatively, insert the AC adapter labeled ‘pXRF Power Cord’ into the power port under the front of the device (Fig. 1, B) and plug the cord into a regulated power outlet.
...