...
6. When the image has finished click Crop and then Save. We user use the uncropped image so the crop here is not important.
...
4. The lights will turn on when the JAI Camera Window opens. Due to the intensity and heat produced by the LEDs it is best to turn off the lights until ready. Turn off the lights in the software window (Figure 28) or with the physical power switch located behind the monitor (Figure 29). Note if the lights are turned off by the harware hardware switch, the lights cannot then be turned on the software command.
...
3. Set the Line Trigger Interval until the Max Image Scan Speed is 8 for now. Adjust values by clicking in the field and typing values. The Line Trigger Value must be greater than the
4. Move the camera carriage over about where the QP Card is on the track.
...