Stratigraphic correlation work space.
Correlator is a program developed for stratigraphic correlation of IODP cores collected at multiple holes at a single drill site. The current full manual (scors_correlator_ug_20190321.docx) is available here. A copy of this and older manuals can be found in a folder Strat-Correlation on the desktop of the Correlator computer, in Cumulus, and elsewhere on the servers. The Quick Start Guide is intended for those who know the methodology and philosophy behind stratigraphic correlation and want to get started using Correlator quickly.
To get started:
The primary computer used for stratigraphic correlation on the JOIDES Resolution (JR) is the Apple computer with two large screens located next the NGR and Core Splitting Room. You can also run Correlator from other Macs or PCs. For this quick guide, the assumption is you are using CorrelatorMac_2.1_rc2.app or a similar version.
Get data for Correlator by using Correlator Downloader program called corrdownloader.jnpl. This is a Java program usually located on the Desktop or on the Mac's Dock bar (look for the Coffee icon).
CorrelatorDownloader is fairly straightforward to use. Select the data you want to download, cull the data if you want by limiting max for min values or trimming data near edges of sections. You can download multiple data sets from all the holes at a site, rather than doing each one separately (Figure 1).
You can hit the "Save control file" to reuse the corrdownloader.jnpl query later. For example, when more data are collected and you need to update the data you are using in Correlator. The query will be saved as a *.jsn file, which can be opened and reused by clicking on the "Browse" and "Upload" buttons in corrdownloader.jnpl.
Figure 1. Screen shot of Correlator Downloader.
Open Correlator: It's the squiggly line icon on the dock (Figure 2). You should see the Data Manager screen (Figure 3). If no data had been uploaded, the Data Manager would show only the Root item
Figure 2. Correlator icon for starting up the program.
Figure 3. Correlator Data Manager window.
Right-click on the word Root on the top line item and select Add new data (the only option except deleting Root).
The content of each data file must be for one hole and one data type. This is automatically true if corrdownloader.jpnl was used.
This is the end of the current quick start guide. See page 6 of the current draft manual (scors_correlator_ug_20190321.docx) to continue with importing data, correlating, and other Correlator functions.
This page originated and has evolved within the Laboratory Manuals, Guides, and Resources wiki. See the page history for credits.