Page History

...

1. Two types of sample racks, can be used in combination
2. Locate the barcode on the side of the sample rack. This should be your first rack, so the instrument knows where to "start" the measurement
3. Barcode should be facing the right hand side, when operator is facing the counter. The first rack should go in the right side of the instrument closer to the back

Power switch
sSample rack direction
barcode
Sample loading direction
Image Added
To Run Sample/Standard

1. 5 Sub-windows show up in the Winspecial main window

Easy GLPProtocol GLP                              Protocol for standard reference measurement
Control Live To Live                         To view Live signal
User BiolabEasy Biolab                          Easy count is default method for unknown sample
Latest Resultshow Result                        Show latest result
Fine TuningSelect Tuning                         Select spectra to plot or store

1. Standards used in Perkin Elmer Unquenched LSC-std, Loading order is ³H, ¹⁴C, and blank
2. Out standard have the following strength. This information is entered in Easy GLP

³H196600 2001/7/01 halfH                             196600       2001/7/01                   half-life is 12.35 yrs
¹⁴C101000 2001/7/01 halfC                            101000       2001/7/01                   half-life is 5730 yrs

1. Instrument will calculate base on the half-life and give you the current strength in comparison to the measurement result.
2. Easy counter cam measure ³H, ¹⁴C, ¹²⁵I, ³²P, ³⁵S, and ⁴⁵Ca. We only carry the first 2 standards.
3. Easy counter test value, please refer to software manual P67.

...