...
| Sample Name | Text ID | Declination (°) | Inclination (°) | Intensity (A/m) assuming 7 cc volume | Number of measurements |
|---|---|---|---|---|---|
| IODPSTD01 | CUBE11242251 | 212.6 ± 0.6 | 34.6 ± 2.6 | 4.35E-02 ± 0.14 | 14 |
| IODPSTD02 | CUBE11242261 | 128.5 ± 1.0 | 39.3 ± 7.8 | 1.23E-02 ± 0.17 | 15 |
| IODPSTD03 | CUBE11242271 | 137135.8 4 ± 01.93 | -1320.5 54 ± 111.60 | 1.29E-02 ± 0.0302 | 1537 |
| IODPSTD04 | CUBE11242281 | 217221.8 3 ± 03.95 | -1322.3 1 ± 161.92 | 8.62E55E-02 03 ± 0.023 | 1537 |
| IODPSTD05 | CUBE11242291 | 1215.8 9 ± 1.0.7 | -1825.5 3 ± 121.01 | 1.18E20E-02 ± 0.07 | 1537 |
| IODPSTD06 | CUBE11242301 | 136.3 2 ± 1.13 | 2927.1 ± 20.15 | 5.94E89E-02 ± 0.1209 | 1537 |
| IODPSTD07 | CUBE11242311 | 320.1 3 ± 0.74 | 34.2 ± 0.1.8 | 7.96E84E-02 ± 0.1402 | 1537 |
| IODPSTD08 | CUBE11242321 | 213214.9 7 ± 05.42 | -410.3 8 ± 131.50 | 1.00E03E-02 ± 0.0207 | 1337 |
| IODPSTD09 | CUBE11242331 | 30.5 ± 0.5 | -24.9 ± 8.8 | 1.48E-02 ± 0.09 | 13 |
| IODPSTD10 | CUBE11242341 | 312314.7 ± 03.45 | -1218.8 ± 1 ± 16.73 | 8.52E87E-03 ± 0.011 | 1337 |
| IODPSTD11 | CUBE11242351 | 324.7 ± 0.5 | 26.0 ± 8.0 | 1.42E-02 ± 0.13 | 13 |
| IODPSTD12 | CUBE11242361 | 21.4 ± 1.5 | 43.8 ± 3.6 | 2.80E-02 ± 0.17 | 13 |
Data used to create Table 2 are found here: QAQC SRM discrete November 2022.xlsx
IODP created Standards
...
Because the standards provided by Lisa Tauxe at Scripps were not designed to be used in the JR-6, four new standards were created which can be used in the JR-6. A strip of magnetic tape was glued to a stick which is secured inside a J-cube. The standards were then given an IRM and measured in the JR-6 followed by the SRM. These standards are oriented as if they were collected from a working half with an assumed volume of 7cc . Each standard was measured 20 times with the JR-6. The process included inserting and removing the standard between each measurement. The mean intensity was calculated as well as Fischer stats for inclination and declination. The standards were also measured 10 times with the SRM. See Table 3 below.
...
For more details on the sample position and the measurement with the SRM, please refer to QAQC Paleomagnetism Standard Operating Procedure.
When the measurements are complete, the data will go to the In folder and can then be uploaded to LORE with MUT2. See QAQC Paleomagnetism Standard Operating Procedure for details.
...