Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Table of Contents







Thin Section Lab on Fo'c's'le Deck


Overview

The Thin Section lab contains equipment for sample preparation of lithified and nonlithified materials for microscopy and microanalytical analysis (e.g. SEM-EDS). Thin section lab technicians are equipped to prepare core material in a wide variety of preparations, including but not limited to thin sections, polished thin sections, and grain mounts. Protocols for thin section creation vary based on material, and can be performed by hand (Buehler MetaServ 250) or through a largely automated process (Logitech LP-50 lapping machine).

Instruments

  • Buehler Petrothin thin section cutting blade and cup wheel
  • Logitech LP-50 lapping machine
  • Logitech PM-5 precision polishing and lapping machine
  • Beuhler MetaServ 250 grinder/polisher
  • Kemet Kemvac vacuum impregnator
  • Zeiss petrographic microscope

Thin Section Requests

Thin section request form

Thin Section Sampling

Petrography References

Minerology References

JOIDES Resolution shipboard library (ship intranet link)

Manuals

Logitech LP 50

Frosting Slides

Flattening Thin Section Billets

Bonding Billets to Frosted Slide

Cutting Billets with PetroThin

Lapping Samples on LP50

Polishing Samples on PM5

End of Expedition Cleanup

Quick Guide TS Laser Engraver

How Disassemble the Logitech Jigs

Carbonate Staining with Alizarin Red

Dickson 1965_Nature_Carbonate staining for thin sections

LAPPING AND POLISHING BY HAND